點膠機的日常維護方法！
工業自動化已是成長的趨勢，在用到膠水的規模，自動點膠機設備也已經被大量出產制造企業利用，這主要是基于利用點膠機設備能為企業降低成本、提橫跨產效率，出格是此刻企業都面臨招工難題，采購自動化設備已迫在眉睫。可是對點膠機的調養維護技巧卻還沒引起企業的重視。在合用點膠機設備的同時也要注膠機的調養與維護。這樣能耽誤點膠機的利用壽命，也能避免設備在出產過程中發生俄然性問題而遲誤正常出產。
Industrial automation has become a growing trend. In the scale of glue use, automatic dispensing machine equipment has been used by a large number of manufacturing enterprises. This is mainly based on the use of dispensing machine equipment can reduce costs and improve cross-production efficiency for enterprises. Especially at this moment, enterprises are facing recruitment problems, and the procurement of automation equipment is imminent. However, the maintenance skills of dispensing machine have not attracted the attention of enterprises. In the use of dispensing machine equipment, attention should also be paid to dispensing machine adjustment and maintenance. This can delay the service life of dispensing machine, and avoid the sudden problem of equipment in the production process and delay normal production.
自動化作為國內點膠機行業率領在點膠機設備的研發、利用、調養等各個方面堆集的豐碩的經驗，客戶在采辦設備后，會配備地的技術撐持給客戶培訓，講解點膠機的合用、調養等。下面為講解幾個為實用的調養點膠機的方式。
Automation, as a leading brand in the domestic dispensing machine industry, has accumulated rich experience in the research and development, utilization and maintenance of dispensing machine equipment. After purchasing equipment, customers will be equipped with professional technical support for customer training, explaining the co-use and maintenance of dispensing machine. Here are some practical ways of adjusting dispensing machines for giant craftsmen.
1、機臺部門請按期擦拭干凈，以增加利用壽命。
1. Machine department should clean it on time to increase service life.
2、改換膠種，需清洗管路，此時先封鎖進料閥 ， 打開點膠閥，將膠桶殘剩膠料排出后，封鎖排料閥打開進料閥將清洗溶劑倒入儲膠桶內，本機，依平時操作方式將溶劑壓出沖刷。
2. Change the rubber type and need to clean the pipeline. At this time, first block the feeding valve, open the dispensing valve, after discharging the residual rubber from the rubber drum, block the discharging valve, open the feeding valve and pour the cleaning solvent into the rubber drum, activate the machine, press the solvent out and wash out according to the usual operation mode.
3、機械定量缸的升降器需要按期潤滑，以增加利用壽命;按期(每周一次)用黃油槍加高溫鋰基脂2-3 槍于油嘴處。
3. The lifter of the mechanical quantitative cylinder needs to be lubricated on schedule to increase its service life; the butter gun and high temperature lithium grease 2-3 gun are used at the oil nozzle on schedule (once a week).
4、氣壓進氣不正常及發現有水氣，請將調壓過濾器內之水氣解除或檢查氣壓源有無異樣即可。
4. If the air pressure is abnormal and water is found, please remove the water in the pressure regulating filter or check whether the air pressure source is abnormal or not.
If you have the requirement of two-component glue machine, you can click on our website to consult: http://www.vrqf.com.cn.
上一篇：直線點膠技術在打膠機行業廣泛應用！
下一篇：自動打膠機的打膠效果取決于什么？
