雙組份打膠機打膠不滿是什么原因導致的？
中空玻璃打膠機出現打膠不飽滿這個問題主要是有以下兩種情況導致的！
The problem of insufficient gluing of insulating glass gluing machine is mainly caused by the following two situations!
一、打膠速度過快導致的
1、 It is caused by too fast gluing speed
有的客戶為了自己的生產節奏追趕生產計劃，將打膠速度認為調整的過快，導致膠體還沒有完全達到合格標準機頭就已經移動到下一個位置進行打膠操作了，如果需要快打膠的速度調整了打膠機的移動參數的話，那么對應的也應該對供膠系統也進行相應的設置，比如這時候我們就需要加大供膠壓力，打膠機的出膠速度來配合對象的移動速度的增加。如果我們僅僅是單獨的增加了打膠機的移動速度而沒有對壓力進行調節的話就很有可能出現打膠不飽滿的情況發生。
In order to catch up with the production plan for their own production rhythm, some customers think that the glue application speed is adjusted too fast, resulting in that the glue has not fully reached the qualified standard, and the machine head has moved to the next position for glue application. If the moving parameters of the glue application machine need to be adjusted quickly, the corresponding glue supply system should also be set accordingly, For example, at this time, we need to increase the glue supply pressure and the glue output speed of the glue applicator to match the increase of the moving speed of the object. If we only increase the moving speed of the gluing machine without adjusting the pressure, it is likely that the gluing is not full.
二、供膠壓力不足
2、 Insufficient glue supply pressure
即便沒有對打膠機的移動速度進行調節也出現了打膠不飽滿的情況，那么也有可能是供膠壓力過小導致的。這時候僅僅需要調整供膠壓力即可解決這個問題的發生。
Even if the moving speed of the gluing machine is not adjusted, the gluing is not full, which may be caused by too small glue supply pressure. At this time, this problem can be solved only by adjusting the glue supply pressure.
三、機頭感應器損壞
3、 Head sensor damaged
這種情況非常的少見，但是也不排除這種情況的發生。打膠機機頭有一個對鋁條深淺進行探測的感應器，如果發現鋁條過深或者過淺的時候他會自動的調整移動的移動速度以及供膠壓力（自動調整幅度是小范圍內的）。
This situation is very rare, but it does not rule out the occurrence of this situation. The head of the glue applicator has a sensor to detect the depth of the aluminum strip. If it is found that the aluminum strip is too deep or too shallow, it will automatically adjust the moving speed and glue supply pressure (the automatic adjustment range is within a small range).
The above is Jinan two-component gluing machine http://www.vrqf.com.cn Thank you for checking the information of our company in your busy schedule. If you want to know more, you are welcome to call for consultation!
上一篇：雙組份打膠機怎么更換打膠機通？
下一篇：雙組份打膠機的注意事項跟操作指南
